+33 6 59 83 50 32

Services

Our expertise in numerical modelling and simulation

Your simulation project

Our expertise allows us to test, optimise and validate your product design by solving the physical phenomena involved during its lifecycle or manufacturing process through the use of mathematical methods such as finite element method.

When you are in touch to tell us about your product and needs, we will build a statement of work of the simulation assumptions that best fit to your application, based on your available data inputs.

Your technical assistance

We support you and your simulation engineers through the development stage of your ongoing project.
We can intervene remotely or onsite, on a per-hour or per-day basis. This service is particularly suitable for emergency situations or when a sudden workload puts at risk your project deadline.

Even though our main simulation tool is COMSOL Multiphysics® we can also work with other softwares in cooperation with some of our partners.

Your COMSOL training

We offer a range of training courses for COMSOL Multiphysics® users to develop their knowledge and autonomy on this leading numerical simulation software.

The main course is an intensive course for beginners to get them started on COMSOL.
This course is regularly held in French in Marseille and Bordeaux, but it has also been held – on request – in English and onsite.

Acoustics simulation

  • Pressure and sound level calculation
  • Building acoustics
  • Audio components
  • Sound in porous media
  • Imaging ultrasounds
  • Sensing ultrasounds
  • High-intensity ultrasounds and heat (HIFU)
  • Piezoelectric transducers
  • MEMS applications

Thermal simulation

  • Temperature and energy flux calculation
  • Conduction heat transfer
  • Convection heat transfer
  • Radiation heat transfer
  • Heat transfer in porous media
  • Phase change materials
  • Joule effect
  • Induction heating
  • Thermal stresses

Mechanical simulation (FEA)

  • Finite element stress and strain calculation
  • Linear and non linear analysis
  • Hyperelastic materials
  • Elastoplasticity and viscoelasticity
  • Contact and friction analysis
  • Fatigue analysis
  • Rigid body analysis

Fluid flow simulation (CFD)

  • Pressure and velocity calculation
  • Laminar and turbulent flow
  • Single-phase or multiphase flow
  • Non-isothermal flow
  • Flow in porous media
  • Non-Newtonian fluid
  • Fluid-structure interaction
  • Tribology and rheology applications

Improve your workflow

Benefit from our expertise to test new ideas on your product and take a right-to-market approach!

EMC3 Consulting’s expertise and responsiveness were crucial to study the technical feasibility of a pyrotechnical system which was installed in an extreme environment of high temperature. We managed to show our customers that our product was the ideal solution to their needs and we could choose with them the best configuration of the product’s design and materials thanks to the results of the numerical simulation.

Dominique Vinci

CEO, SUPRAMECA

About EMC3 Consulting

Thomas Clavet, founder and principal engineer at EMC3 Consulting, is an Arts et Métiers ParisTech engineer and holds a Master of Science in mechanical engineering and numerical methods from the Royal Institute of Technology (KTH) of Stockholm, Sweden.

After experiences as a mechanical engineer in the nuclear industry, and as an applications engineer at COMSOL® in the UK and Ireland, where he met and trained many COMSOL Multiphysics® users, Thomas decided to found EMC3 Consulting in 2014.

Labels et certifications

COMSOL Certified Consultant

EMC3 Consulting is a COMSOL Certified Consultant, as an expert in using its flagship product COMSOL Multiphysics for various companies and research labs, with its associated modules in acoustics, heat transfer, structural mechanics and fluid mechanics.

Logo CIR (Crédit Impôt Recherche)

EMC3 Consulting is certified by the French Ministry of Research as a private company able to provide R&D assistance to third parties involved in research work. It is called CIR (“Crédit Impôt Recherche”) and can lead to tax credit for companies registered in France and working on simulation projects with EMC3 Consulting.

Logo Datadock, plateforme de référencement des organismes de formation

EMC3 Consulting is certified by the French portal Datadock for the quality and funding audit of its training services. It is registered in France under the number 93.13.15750.13 for administration reference.

Logo SiMSEO, label de subvention des PME

EMC3 Consulting is part of the SiMSEO programme for French SME’s which aims at helping companies integrate the use of numerical simulation into their product development cycle. French SME’s can benefit from a grant representing 50% of the outsourced work to EMC3 Consulting, capped at 10 000 €.

R&D and industrial engineering

Our numerical modelling and simulation services are intended for both R&D (fundamental research or applied research) and industrial engineering projects requiring powerful computational resources and highly experienced staff. Please be in touch to learn more about our expertise.

Pin It on Pinterest

Share This